The Midi Murf has taken more time to convert over than I had originally anticipated. There were several challenges in getting all of the control hardware to fit in a reasonable sized HP space. Based on the effort it took I can say with confidence that I will not be converting a lot of these over!
Ok, yes, I have converted these before, but not in the same aesthetic of Moog’s current eurorack line. I was able shave off a few HP’s too making it smaller than the original conversion. These custom conversions are leading to somewhere right? More coming soon 😀
Original Manufacturer’s website page HERE!
I was really hoping that Moog would have been putting out more eurorack modules in this last year. Maybe this will inspire them! Here I am converting over their MoogerFooger guitar pedals to eurorack. Since Moog has picked a eurorack aesthetic, with the Mother 32 module, it was a ‘no brainer’ to make these follow suit. I am working on the rest of them so stay tuned for more!
Taking my favorite pedal and converting it over to euro has to be one of the more difficult tasks I have accomplished to date. Something that is as well designed, as this Space pedal is, I had to bring all my skill sets in order to really add what I believe is the next level. If you are familiar with this pedal then I don’t have to tell you that it is already great on its own. But the little CV demon in me would not rest as it was always asking, “what if you could control all of those knobs with CV?” This has been an ongoing effort for a year or more now, and I finally can say I am happy with how it has turned out! Pricing and availability to be announced.
I have been asked recently what I thought a good DIY starter project might be for eurorack. There are two that come to mind that I have completed recently. First is the BMC45 router from Barton. This is a fun straight forward build. Most of Barton’s eurorack DIY kits are very well thought through and as a plus are very affordable. I added four custom mute buttons to this one as I thought that made a nice addition to live performance. The link to that kit is here:
The next one is a Business Card sized Sequencer from Div 6. Here I took two of them and stacked them into a eurorack module. Realize when you buy the kit it is just ONE sequencer. I bought two for this custom build. This kit was very easy to build and dare I say the most ‘inexpensive sequencer you will find!’ Realize the custom euro panel I made for this was a very difficult task. There are 122 holes in this panel and was very challenging to make. More info can be found here on the DIY PCB kit:
Digging deeper into CV control for Guitarists, and I am not finding too much. So I decided on a custom CV controlled Avid Eleven would make a great Christmas gift this year. CV input with added attenuator for each of the six parameter knobs. If you know much about the Eleven, you know the front six knobs allow you to change the onscreen parameters. Now you can control them with voltages from your modular synth. I also added a CV input for the tap tempo control, so you can control the tempo with a voltage clock. This also means you could setup six pedals and control all six knobs with pedals too, if you wanted! DEMO VIDEO COMING SOON!
Continuing in the same thread of combining eurorack modules together, here are a couple more examples. First is the QCDG8. I took a 4MS QCD and expander and smashed a Circuit Abbey G8 right in between. I also added much needed bufferred mults to the outputs of the QCD and expander. This has a nice flow with all of the jacks down the middle of the panel.
Next is the UTILITA. Where do all of those clock outputs from the above QCDG8 go? This module(s) combines a Doepfer A-150, a Blue Lantern CMOS Party, 3 NE Sinclastic Empulatrix and a MI Branches. By combining them into one panel I can ‘normal’ some of the inputs making it much easier and quicker to patch. I also solidify my workflow. The more you get used to something the more it will seem like second nature.
As you gain experience with your modular synthesizer, you will start to see you will regularly patch your modules the same way most of the time. Once you establish the workflow you use most often, it makes sense to combine modules together into ‘SUPER’ modules if you will. You will obviously have your own ideas what you would make into a SUPER module, but that is the point. You are starting to think of your modular as your custom instrument and less like test equipment. Don’t be afraid of learning about what is behind the panel. It can be just as much fun as what is in front of the panel!
I mentioned the TRISPECTRUM in the last video I published below. The start of that voyage was getting and using just one Spectrum OSC from WMD & SSF. Once I had a chance to really put that OSC thru its paces, I have to admit I really fell in love with it. Those guys nailed it as far as I was concerned. The more I used it, I thought, “this would be even better if I could stack three of them together”. Having the ability to sync all three and individually pull each one in and out of sync would be cool. Waveform switching like on the Mini Moog and mutes and attenuators made sense from a performance aspect as well.
The Ideas came hard and fast. Before you knew it I had my first prototype. Pictured here.
Then it started to get a little crazy. I thought, how about CV control over octaves? Why not have some nice Vactrol VCA’s and have plenty of mults pre and post those Vactrol VCA’s? I spent a little time with Bill from WMD and I was on my way. Pic of the back.
Please excuse the usual Gameboy parts all over. I was also finishing up the last of the Synthboy+ while working on this too 🙂 Pic of the final so far.
Overall I am very pleased how this came out. I am realizing how much more performance power you can gain by just combining several modules together. Even if it is just normaling the obvious jacks together, like 1 V/Oct and Pulse width. That just saves me extra cables and a mult and time to do this otherwise. Once you start gaining experience using your eurorack modules you should start to see how they could be even better configured to your individual liking. If you want more info check out the link below. I will post more info if I make more updates. Never rest!
I recently looked back over last year and realized I found the 1U format even more valuable as time went on. I did so not just by acquiring 1U tiles from Erthenvar and Pulplogic, but also by creating some of my own and modding others. From the first drum machine in 1U to the first Oscilliscope in 1U, I found ways to maximize this small format. I am excited to move forward with promoting and inventing in this format!
This is one of the best Sequencers in euro today. I really love the repeats and ratchets, but I sometimes screw up the timing when pressing the buttons manually to activate them. I decided to add the feature to the hardware and also give it a new look in black face. Almost looks a little Elektron like don’t you think? If you are interested in finding out more info on this sequencer, please check out the manufacturer’s product page here: http://www.audiodamage.com/hardware/product.php?pid=ADM06